Certification Rate
100%
Very high DOL cert
2026 data Public-data reference Official source
Sandvik Machining Solutions USA, LLC
A DOL Labor Condition Application record spanning FY2023–2025. Review the filing volume, DOL certification record, and offered-wage context below.
- DOL LCA filings
- 7
- DOL-certified
- 100%
- Median offered wage
- $90,286
Mebane, NC NAICS: 333517
Sandvik Machining Solutions USA, LLC's H-1B LCA filing count
U.S. Department of Labor's OFLC discloses 7 Labor Condition Application filings naming Sandvik Machining Solutions USA, LLC from FY2023 through FY2025, drawn directly from DOL's quarterly public disclosure releases. An LCA is the wage-and-working-conditions attestation an employer files with DOL before petitioning USCIS for an H-1B worker: it is a filing record, not a USCIS approval, a job offer, or a confirmed hire, and the count reflects filings, not people, since an employer sponsoring the same role at more than one worksite, or refiling across fiscal years, is counted once per filing. See filing history · Recent LCAs
Sandvik Machining Solutions USA, LLC's USCIS petition outcomes
Separate from the DOL filing record above, U.S. Citizenship and Immigration Services adjudicated 4 H-1B petitions naming Sandvik Machining Solutions USA, LLC through FY2023, and approved nearly every one of them: 100% approved (4 approvals, 0 denials). A DOL certification is the labor-condition step filed before a petition; this USCIS figure is the actual adjudicated outcome, and the two rates commonly differ.
The verdict
Sandvik Machining Solutions USA, LLC is listed in 7 DOL LCA filings, more filings than 82% of employer filers in this extract. DOL certified 100% of those LCAs; the median listed offered wage is $90,286. This is not a USCIS approval, hiring, or sponsorship ranking.
- 7
- DOL LCA filings, FY2023–FY2025
- 100%
- DOL-certified
- $90,286
- median offered wage
- Top 18%
- of employer filers by volume
According to U.S. Department of Labor OFLC LCA disclosure files (FY2023–FY2025). Based in Mebane, NC.
Saved on this device only, no account, no email.
Open saved list
Follow this profile's data updates
Updates when the published DOL data vintage changes; this is a feed, not an alert service.
Sandvik Machining Solutions USA, LLC vs all U.S. employer filers by LCA volume
Where this employer's disclosed Labor Condition Application count sits among every tracked employer filer (inventory signal, not a sponsorship ranking)
7 25161st of 122824 higher than 97,663 of 122,824 employer filers
Employer filers, banded by disclosed H-1B LCA filing count
Each bar is a band; taller bars hold more employer filers. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source U.S. Department of Labor OFLC · FY2023–FY2025
LCA filing shape · Sandvik Machining Solutions USA, LLC
Derived from this employer's disclosed LCAs on file (FY2023–FY2025), title mix and worksite counties, not national boilerplate. LCA filings do not establish USCIS outcomes or confirmed hiring.
Offered-wage span on file: $75,000–$125,000 .
Title concentration
- Energy & Sustainability Engineer 2 · 28.6% · $80,000
- Process Engineer 1 · 14.3% · $75,000
- Methods and Process Engineer 1 · 14.3% · $93,000
- Internal Auditor 1 · 14.3% · $85,000
- Head of T4.0 1 · 14.3% · $125,000
Worksite counties
- ALAMANCE, NC 3 · 42.9%
- OCONEE, SC 3 · 42.9%
- WAKE, NC 1 · 14.3%
DOL LCA release change
What changed between the two LCA fiscal years
- Sandvik Machining Solutions USA, LLC disclosed 4 H-1B LCA filings in FY2025 after zero filings in FY2024.
Above-prevailing wage posture
On 7 LCAs with comparable offered vs prevailing wages, Sandvik Machining Solutions USA, LLC averages about 18.7% above the prevailing wage (national baseline ≈ 17.8%). Dominant PW level on file: Experienced (Level III) (28.6% of LCA filings).
Avg. Salary
$90,286
Below portal avg
Total Workers
7
Small worker count
Wondering how long it takes USCIS to process an H-1B petition for this employer?
See current I-129 processing times →
Salary Analysis
Compensation range for H-1B positions at Sandvik Machining Solutions USA, LLC
Minimum
$75,000
Maximum
$125,000
Average Salary
$90,286
Wage vs. DOL Minimum
+18.7%
Above DOL floor
national avg +17.8%
Typical DOL Wage Level
Experienced (Level III)
28.6% of LCA filings
Full-Time Positions
100%
Primary Worksite County
ALAMANCE, NC
42.9% of LCA filings
Top Occupations
Most frequently listed job titles at Sandvik Machining Solutions USA, LLC
| Job Title | LCA filings | Avg. Salary |
|---|---|---|
| Energy & Sustainability Engineer | 2 | $80,000 |
| Process Engineer | 1 | $75,000 |
| Methods and Process Engineer | 1 | $93,000 |
| Internal Auditor | 1 | $85,000 |
| Head of T4.0 | 1 | $125,000 |
| Customer Value Specialist | 1 | $94,000 |
Nationwide peers near Sandvik Machining Solutions USA, LLC's 7-LCA band
Cross-state DOL neighbors for Sandvik Machining Solutions USA, LLC - LCA filing-count and offered-wage axes, outside NC.
Similar avg offered wage
Cross-state employer filers with a comparable average listed offered wage ($90,286 here).
What People Ask
How many LCAs has Sandvik Machining Solutions USA, LLC filed?
Sandvik Machining Solutions USA, LLC is listed in 7 DOL Labor Condition Application filings covering 7 listed worker positions from FY2023 to FY2025. An LCA is a Labor Department filing record, not confirmation of a USCIS petition, hire, sponsorship, or visa approval.
Is Sandvik Machining Solutions USA, LLC a large or small H-1B filer compared to other employers?
Among 122,824 employer filers in the DOL disclosure extract, Sandvik Machining Solutions USA, LLC ranks #22703 by total LCA filing count (7 filings). 97,663 employer filers have fewer disclosed filings in this extract. This is a filing-volume comparison only, not a USCIS approval, hiring, or sponsorship ranking.
What share of Sandvik Machining Solutions USA, LLC's LCA filings are DOL-certified?
Sandvik Machining Solutions USA, LLC has a 100% DOL certification rate, with 7 out of 7 LCA filings certified. That is the Labor Department step, not a USCIS visa approval rate.
How much does Sandvik Machining Solutions USA, LLC offer according to its H-1B filings?
The average offered wage listed in Sandvik Machining Solutions USA, LLC's LCAs is $90,286. Listed wages range from $75,000 to $125,000 and are not verified actual compensation.
What roles does Sandvik Machining Solutions USA, LLC file the most H-1B LCAs for?
The top job titles in Sandvik Machining Solutions USA, LLC's LCA filing records include Energy & Sustainability Engineer, Process Engineer, Methods and Process Engineer. The most common listed title is Energy & Sustainability Engineer with 2 LCA filings at an average listed offered wage of $80,000. This does not establish actual job openings, hiring, or approved petitions.
Where is Sandvik Machining Solutions USA, LLC headquartered?
Sandvik Machining Solutions USA, LLC is headquartered in Mebane, NC. Their H-1B workers are distributed across 2 states, with the most positions in NC, SC.
Is Sandvik Machining Solutions USA, LLC classified as H-1B dependent under DOL rules?
No, Sandvik Machining Solutions USA, LLC is not classified as H-1B dependent.
Has Sandvik Machining Solutions USA, LLC's H-1B filing volume grown or shrunk over the years?
Sandvik Machining Solutions USA, LLC is listed in 3 LCA filings in FY2023 and 4 in FY2025. The average listed offered wage increased from $86,000 to $93,500. This historical filing series does not predict sponsorship, hiring, or visa outcomes.
Disclaimer: Informational only, not professional advice.
Read with Sandvik Machining Solutions USA, LLC
ABS(total_petitions) peers first, then a LARGEST-distance pole and a stamp-branched drill, not a fixed Related strip. This page stamps TRACE-BOOK · CERT-LOCK · WAGE-BELOW.
1 Point System, LLC · TRACE-BOOK
ABS(total_petitions) peer at 7 LCAs (Δ 0 heavier vs Sandvik Machining Solutions USA, LLC); CERT-LOCK · WAGE-BELOW vs this page's TRACE-BOOK · CERT-LOCK · WAGE-BELOW.
10Jumps Inc. · TRACE-BOOK
ABS(total_petitions) peer at 7 LCAs (Δ 0 heavier vs Sandvik Machining Solutions USA, LLC); CERT-SOFT · WAGE-BELOW vs this page's TRACE-BOOK · CERT-LOCK · WAGE-BELOW.
110 Holdings LLC · TRACE-BOOK
ABS(total_petitions) peer at 7 LCAs (Δ 0 heavier vs Sandvik Machining Solutions USA, LLC); CERT-LOCK · WAGE-PAR vs this page's TRACE-BOOK · CERT-LOCK · WAGE-BELOW.
111 Industries, Inc · TRACE-BOOK
ABS(total_petitions) peer at 7 LCAs (Δ 0 heavier vs Sandvik Machining Solutions USA, LLC); CERT-LOCK · WAGE-PAR vs this page's TRACE-BOOK · CERT-LOCK · WAGE-BELOW.
JPMorgan Chase& Co. · LARGEST-distance pole
NC pole at 13,804 LCAs stamps MEGA-BOOK · CERT-LOCK, farthest ABS(total_petitions) contrast from Sandvik Machining Solutions USA, LLC's TRACE-BOOK.
NC worksite board · TRACE-BOOK
Open the NC state board after the ABS peers. Sandvik Machining Solutions USA, LLC stamps TRACE-BOOK · CERT-LOCK inside that worksite mix.
Wage levels primer · WAGE-BELOW
Sandvik Machining Solutions USA, LLC's WAGE-BELOW · TRACE-BOOK stamps sit mid-band. Wage levels I-IV explain the floor behind the offer.
What to do with this profile
Use the DOL LCA record for Sandvik Machining Solutions USA, LLC to compare filing volume and offered wages, not USCIS outcomes.
- Sandvik Machining Solutions USA, LLC filed 7 LCAs in the indexed extract (100% certified in-file). That volume ranks higher than 82% of employer filers.
- Compare offered wages and certification rates against 6 same-state filers on the chart above. Jump to compare
- See how other employers in NC rank on LCA filing volume this vintage. NC filers
- Read what an LCA filing records versus a USCIS petition approval. LCA vs petition
DOL disclosure data only. Not legal advice, sponsorship guarantees, or visa eligibility.
Every figure on PlainVisa is rendered directly from federal source data, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, the data changelog, or report a data error. Data current as of 2026-09-09.